Cisco Systems 1105 manual Lan

Chapter 3 Configuring Devices

	Using the Templates
Table 3-24 11a Radio Advanced Settings (continued)
Field	Description
Radio Cell Role	From the list, enter one of the following:
	• Client/Non-Root—use this setting for
	diagnostics or site surveys, such as when
	you need to test and access point by
	having it communicate with another
	access point or bridge without accepting
	associations from client devices.
	• Repeater/Non-Root—Use this setting
	for access points that are not connected
	to a wired LAN and which transfer data
	between another access point or repeater.
	• Access Point/Root—Use this setting if
	the access point is connected to a wired
	LAN.
Maximum Number of	Enter the maximum number of wireless
Associations	networking devices that are allowed to
	associate to the access point.
	If you enter 0 it means that the maximum
	possible number of associations is allowed.
	Click see details to see which versions this
	setting is valid for.
Use Aironet Extensions	From the list, select one of the following:
	• yes—Enable load balancing, Message
	Integrity Check (MIC), and WEP key
	hashing.
	• no—Does no enable the features listed
	above.

	User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14947-01		3-83