Cisco Systems 1105 manual Displaying an AP and Bridge Connected to Switch Report

Chapter 5 Using Reports

Displaying Current Reports

Table 5-26 Switch Summary Report (continued)

Column	Description
System Version	The software version on the switch.
Link to the AP and Bridge	Click for details.
Connected	For more information, see Displaying an AP
	and Bridge Connected to Switch Report,
	page 5-46.

Step 6 For information on the Fault Summary table, see Viewing the Fault Summary Report, page 5-3

Step 7 To export the report, click Export. (See Exporting a Report, page 5-66.)

Step 8 To email the report, click Email Report. (See Emailing a Report, page 5-66.)

Displaying an AP and Bridge Connected to Switch Report

Procedure

Step 1 Select Reports > Current. The window refreshes with a device selector in the left pane.

Step 2 If you want to search for the device, use the dialog box in the left pane above the device selector:

a.From the list, select the method you want to use to search for the device: by name or by IP address.

b.Enter the IP address or name, or use an asterisk (*) as a wildcard to denote numbers and letters, then click Search. The requested device appears in the Search Results folder.

Step 3 From the device selector in the left pane, click to expand the folder and select the switch for which you want a report. The right pane refreshes.

Step 4 From the Report Name list, select AP and Bridge Connected to Switch Report.

	User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
5-46	78-14947-01