Cisco Systems 1105 manual Field Description

Chapter 3 Configuring Devices

Using the Templates

Field	Description
Lookup MAC	Click one of the following:
address on	• Yes—Use this setting to allow looking up a MAC
Authentication
	address on the authentication server.
Server if not in an
	• No—Use this setting to disallow looking up a
Existing Filter List?
	MAC address.
Is MAC	From the list, select one of the following:
Authentication alone	• Yes—Use this setting to specify that client devices
sufficient for a client
	that associate to the access point using 802.11
to be fully
	open authentication, first attempt MAC
authenticated?
	authentication.
	• No—Use this setting to specify that MAC
	authentication alone is not sufficient.
	Click see details to see which versions this setting is
	valid for.
New Destination	Enter a destination MAC address by entering the
MAC Address	address in one of the following ways:
	• With colons separating the character pairs
	(00:40:96:12:34:56, for example)
	• Without any intervening characters
	(004096123456, for example)
Allowed	Click to pass traffic to the MAC address.
Disallowed	Click to discard traffic to the MAC address.

Step 3 Click Add to add the MAC address to the Current MAC Address Filters list.

Step 4 To remove a MAC Address, select it from the Current MAC Address Filters list, then click Remove.

	User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14947-01		3-13