Cisco Systems 1105 manual This command sets the date and time, Ntp server Show clock

Appendix B Command Reference

Privilege Level 15 Commands

To set the date and time, use the set option.

If you configure the system to use Network Time Protocol (NTP), you do not need to set the system clock manually using the clock command.When setting the clock, enter the current time in Coordinated Universal Time (UTC).

For more information about the system time, refer to “Setting System Date and Time” in the Installation and Configuration Guide for the Cisco 1105 Wireless LAN Solution Engine.

Example

This command sets the date and time:

clock set 16:00:00 dec 11 2001

Tue Dec 11 16:00:00 UTC 2001

Related Commands

ntp server

show clock

df

To display the current storage usage on the WLSE, use the df command.

df

Usage Guidelines

This command in primarily intended as a debugging tool for problems with full partitions.

Example

The following command displays the current storage usage on the WLSE:

	df
	Filesystem	Size	Used Avail Use%			Mounted on
	/dev/sda12	151M	59M	92M	39%	/
	/dev/sda1	49M	2.8M	44M	6%	/boot
	/dev/sda7	985M	24M	911M	3%	/extra
	User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
B-22						78-14947-01