3-51
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14947-01
Chapter3 Configuring Devices Using the Templates
Note Changing this setting may cause the access point to reboot.
Procedure
Step 1 Select Ethernet > Filters. The Ethernet: Filters dialog box displays in the right
pane.
Step 2 Complete the following:
Note Clicking Clear removes all the current entries in the window and any
entries you have made in other Template windows up until that point.
Table3-13 Ethernet Filters Settings
Field Description
Ethertype
Receive Enter the ID of a defined Ethertype filter, or select one of the
filters you created using Association > Ethertype Filters.
Transmit Enter the ID of a defined Ethertype filter, or sel ect one of the
filters you created using Association > Ethertype Filters.
IP Protocol
Receive Enter the ID of a defined IP protocol filter, or select one of
the filters you created using Association > IP Protocol
Filters.
Transmit Enter the ID of a defined IP protocol filter, or select one of
the filters you created using Association > IP Protocol
Filters.
IP Port
Receive Enter the ID of a defined IP port filter, or select one of the
filters you created using Association > IP Port Filters.
Transmit Enter the ID of a defined IP port filter, or select one of the
filters you created using Association > IP Port Filters.