Cisco Systems 1105 manual AP Qbss QoS Report

Chapter 5 Using Reports

Displaying Current Reports

Procedure

Step 1 Select Reports > Current. The window refreshes with a device selector in the left pane.

Step 2 If you want to search for the device, use the dialog box in the left pane above the device selector:

a.From the list, select the method you want to use to search for the device: by name or by IP address.

b.Enter the IP address or name, or use an asterisk (*) as a wildcard to denote numbers and letters, then click Search. The requested device appears in the Search Results folder.

Step 3 From the device selector in the left pane, click to expand the folder and select the access point for which you want a report. The right pane refreshes.

Step 4 From the Report Name list, select AP QBSS QoS Report.

Step 5 Click View. The report is displayed with the following headings:

Table 5-22 AP QBSS QoS Report

Column	Description
RF Interface	The radio frequency interface.
Traffic Category	The category of traffic.
CWmin	The minimum contention window value.
CWmax	The maximum contention window value.
Generate QBSS	Indicates if basic 802.11 quality of service is enabled or
Element	disabled.
As Of	The time the access point’s state last changed.
	For more information, see Time Display, page 1-5.

Step 6 To sort table data, click on the column heading you want to use to sort the data:

•A triangle indicates ascending order.

•An upside-down triangle indicates descending order.

•No triangle indicates that the data is not sorted.

	User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14947-01		5-39