Cisco Systems 1105 manual Immediate Inventory of All Devices

Chapter 6 Performing Administrative Tasks

Using Discovery and Managing Devices

Step 4 Click Run Inventory for Selected Devices. The inventory job starts immediately. Managed devices are polled and information is collected. WLSE displays are updated accordingly.

Step 5 The Tasks History window appears. You can expand the Inventory folder to see the results of the inventory collection:

•Inventories of selected devices are named InventoryRunNow_number. The number increments each time you run an inventory.

•Click the inventory name. The Run Log appears, showing the start and end times of the inventory and the type of data that was collected for the devices you selected.

Immediate Inventory of All Devices

Use this option to run an immediate inventory of all devices. This inventory is the same as the scheduled basic inventory. Inventories that collect data for all devices are named Inventory, whether they are scheduled inventories or immediate inventories run by a user.

Note Your login determines whether you can use this option

Procedure

Step 1 Select Administration > Discover > Inventory > Inventory All Devices.

Step 2 Click Inventory All Devices. The inventory job starts immediately. Managed devices are polled and information is collected. WLSE displays are updated accordingly.

If an inventory is currently running, a message appears. You should wait for the running inventory to complete before starting the immediate inventory.

Step 3 The Tasks History window appears. You can expand the Inventory folder to see the results of the inventory collection.

•Inventories of all devices are named Inventory.

	User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
6-26	78-14947-01