Chapter3 Configuring Devices
Using the Templates
3-100
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14947-01
Server Type Enter the type of server.
Click * (asterisk) for information on which
version this setting is valid
Port Enter the port number your server uses for
authentication.
Shared Secret Enter the shared secret used by your server. It
must match the shared secret on the RADIUS
server.
Retran Int (sec) Enter the number of seconds the access point
should wait before retransmitting.
Click * (asterisk) for information on which
version this setting is valid.
Time Out (se c ’s) Enter the number of seconds the access point
should wait before authentication fails.
If the server does not respond within this
time, the access point tries to contact the next
defined authentication server.
EAP Auth From the list, select one of the following:
•Yes—Use this server for EAP
authentication.
In this type of authentication, the access
point relays authentication messages
between the server and the
authenticating client device.
•No—Do not use this server for EAP
authentication.
Click * (asterisk) for information on which
version this setting is valid.
Table3-29 Server-Based Security Settings (continued)
Field Description