Chapter3 Configuring Devices
Using the Templates
3-136
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14947-01
Step 4 To import another template, click Back and repeat Step 3.
Step 5 When you are finished, click Done.
Step 6 View the template you imported by selecting Configure > Templates and
selecting it in the Existing Templates list.
Non-IP-Identity Select this option if you do not want to
download identity parameters, such as IP
address, from the access point.
Some parameters are ignored using this type
of import. The downloaded configuration
parameters are not a full representation of the
access point's configuration but an optimal
representation.
Full Select this option to import a full
configuration from the access point.
This type of import includes the access
point's identity parameters, such as sysname,
IP address, etc.
Note When using this option, it is
recommended you delete all the
custom key values from the imported
template before applying the
template to any device.
Device Credentials
User Name If the device is not managed by the WLSE, or
if the device is managed but the credentials
have not been set, enter the username on the
access point.
User Password If the device is not managed by the WLSE,
enter the user password on the access point.
Field Description