Cisco Systems 1105 manual Configuring Devices

Chapter 3 Configuring Devices

		Using the Templates
Table 3-6	IP Port Filters Special Cases Settings (continued)
Field		Description
Priority		From the list, select one of the following:
		• Default—This setting is the same as best effort, which
		applies to normal LAN traffic.
		• Background—Use this setting for bulk transfers and
		other activities that are allowed on the network but
		should not impact network use by other users and
		applications.
		• Excellent Effort—Use this setting for a network's most
		important users.
		• Controlled Load—Use this setting for important
		business applications that are subject to some form of
		admission control.
		• Interactive Video—Use this setting for traffic with less
		than 100 ms delay.
		• Interactive Voice—Use this setting for traffic with less
		than 10 ms delay.
		• Network Control—Use this setting for traffic that must
		get through to maintain and support the network
		infrastructure.

Time to Live (msec)

unicast	Enter the number of milliseconds unicast packets should stay
	in the buffer before they are discarded.
multicast	Enter the number of milliseconds multicast packets should
	stay in the buffer before they are discarded.
Alert	From the list, select one of the following:
	• yes—Use this setting to send an alert to the event log
	when a user transmits or receives the protocol through
	the access point.
	• no—Use this setting to not send an alert to the event log.

	User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14947-01		3-27