Cisco Systems 1105 manual Selecting Devices

Chapter 4 Updating Device Firmware

Managing Firmware Jobs

Selecting Devices

Procedure

Step 1 Click Select Devices. The Select Devices window appears. All managed devices are listed in the Device selector in the middle pane.

Note Clicking Clear removes all the current entries in the window and any entries you have made in other Job windows up until that point.

Step 2 To search for devices:

a.From the list in the search area located in the middle pane, select the method for searching: by device name or IP address.

b.Enter the IP address or name. You can use asterisks (*) as wildcards. An asterisk denotes any number of characters in a name or an entire octet in an IP address; for example, *AP or 172.*.*.*.

c.Click Go. The matching devices appear in the Search Results folder in the device selector.

Step 3 To select devices for image upload, expand a folder that contains the devices you want to include in the job. Then click the device group folder. The group and all its devices are added to the Available Devices list.

For more information on device grouping, see Managing Groups, page 6-37.

Step 4 From the Available Devices list, select a group or individual devices, then click Add. The devices appear in the Selected Devices list box.

The devices in the Selected Devices list box will receive the image you select.

Step 5 To add devices from other groups, repeat steps 3 and 4.

Step 6 To remove devices, select them from the Selected Devices list, then click Remove.

Step 7 From the menu in the left pane, go to the next step, Schedule Job. See Scheduling the Job, page 4-13.

	User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
4-12	78-14947-01