Click Apply. The following table appears | Cisco Systems 1105

Chapter 2 Fault Monitoring

Displaying Faults

Step 3 Click Apply. The following table appears:

Note If no data is displayed in the table, there are no faults for your filtering selection to report.

Table 2-2 Display Faults Table

Column

IP Address

Hostname

Family

Product

Type

Description

Severity

State

Timestamp

Description

The device IP address.

Click to see various reports about the device. For information on the reports, see Using the Device Center, page 5-1.

The device for which the fault is reported.

Click to see various reports about the device. For information on the reports, see Using the Device Center, page 5-1.

The product family.

The product name.

The device or the sub-device component.

A description of the fault.

Click to see fault details. See Viewing Fault Details, page 2-5.

The fault severity level.

The operational state of the device.

Indicates the time, based on the client browser, that the state of the device last changed. See Time Display, page 1-5.

Click to see fault details. See Viewing Fault Details, page 2-5.

	User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
2-4	78-14947-01

Image 32

Cisco Systems 1105 manual Click Apply. The following table appears, Column

Contents

Corporate Headquarters Copyright 2002, Cisco Systems, Inc All rights reserved N T E N T S Iii Setting Trap Notification Assigning an Auto-Managed Configuration Displaying an EAP Authentication Report Displaying a Server Response Time Graph Vii Command History Feature B-3 Viii Privilege Level 15 Commands B-17 Show ipchains show hosts B-61show maillog Show tech B-68 Xii Audience ConventionsConvention Boldface font Related Documentation Option Network PreferencesPaper Documentation Xiv Online Documentation Obtaining DocumentationWorld Wide Web Obtaining Technical Assistance Ordering DocumentationDocumentation Feedback Cisco documentation is available in these ways 800 553-NETS Xvii Cisco.comTechnical Assistance Center Xviii Cisco TAC Web SiteCisco TAC Escalation Center Xix Page Overview of the Wireless LAN Solution Engine A P T E R Understanding the Wlse User Interface Wlse Dashboard Tabs and Subtabs Main Tab Subtabs Administrative Tasks ButtonsPerforming Devices under management, run immediate inventories, view Device Name and IP Address Display Time Display Logging In and Out ProcedureCiscoWorks 1105 Wireless LAN Solution Engine Getting Started with Device Management Task Description and References Inventories, Administering Users,Managing Devices, page 6-2. After moving devices to Displaying Faults Settings, page 2-20 to set policies Description FieldDevices Severity State Name/IP Click Apply. The following table appears Column Viewing Fault Details Managing Profiles, Notification Settings,Fault details for Related Topics Family Product Type IfIndex Conditions DescriptionColumn Description See Time Display, Fault History Managing Profiles Creating a Profile Copying a ProfileAssigning a Profile to a Device, Viewing Devices, Use this option to create a profile Renaming a Profile Editing a ProfileUse this option to rename a profile Use this option to edit a profile Use this option to delete a profile Deleting a ProfileAssigning a Profile to a Device Viewing Devices Profile Choices Specifying Security Policies Field Description Click Add to add the Ssid to the list, then go to Step Go to Step Complete the following StepComplete the following Specifying Fault Thresholds Setting Access Point Fault Thresholds Enable Poll Interval Settings Overloaded Continue to Step Setting Switch Fault Thresholds Degraded Go to step Step To set the new entries Setting Router Fault Thresholds Setting Server Response Time Notification Settings Setting Trap Notification Before You Begin Setting Syslog Notification Setting Syslog Notification, Emailing Faults, Emailing Faults To save your settingsSetting Trap Notification, Emailing Faults, Attribute Description Procedure Setting Trap Notification, Setting Syslog Notification, Fault Monitoring Notification Settings Configuring Devices Using the Templates Template Categories Template ChoicesRelated Topic See Naming Guidelines, page A-1 Using Express TemplateNaming the Template Express Template Settings Configuring Devices Field Description LAN Setting Up Association Finish to save the template. See Finishing the Template, Defining Spanning Tree Protocol This option is used for only bridges Bridge Enable-Use this setting to enable STP onDisable-If you do not want STP enabled Configuring Devices Defining Address Filters Field Description Creating New Ethertype Filters Procedure Defining Ethertype Filters Creating New Ethertype Filters Settings Deleting Ethertype Filters Procedure Creating Special Cases Procedure Configuring Devices Deleting Special Cases Procedure Defining IP Protocol Filters Using this option you can also Creating New IP Protocol Filters Procedure Deleting IP Protocol Filters Procedure IP Protocol Filters Special Cases Settings Field Description Defining IP Port Filters Creating New Port Filters Procedure To create and enable port filters, enter the following Deleting Port Filters Procedure IP Port Filters Special Cases Settings Configuring Devices Configuring Policy Groups Adding or Deleting a New Policy Group To add a new policy group, enter the followingFilters IP Protocol Protocol Filters Deleting an Existing Policy Group from a Device Configuring VLANs Add a new VLAN-SeeAdding a New VLAN, Setting on the switchEnter the following information Created using Association Policy Groups Adding a New VlanTo add a new VLAN, enter the following Enter the identification number of the Vlan Field Description Vlan Configuring Quality of Service Deleting an Existing Vlan Procedure Quality of Service Settings Configuring Service Sets This option allows you to define service sets Add a new Service Set-SeeAdding a New Service Set, Adding a New Service Set ProcedureUsing Association Policy Groups Association VLANs Field Description Finish to save the template. See Finishing the Template, Deleting an Existing Service Set Procedure Defining Advanced Associations 10 Advanced Association Settings SystemWarning-Indicates that an error or ProtocolWarning-Indicates that an error orPortWarning-Indicates that an error or failure ExternalWarning-Indicates that an error or Field Description Finish to save the template. See Finishing the Template, Identifier Configuring Port AssignmentsLists the port’s 802.11 radio drivers association Configuring Dscp to CoS Identifying the Ethernet Port Configuring the Ethernet PortUse this option to configure the device’s Ethernet port Setting Up Ethernet Filters Enter the following information to identify the port Filters you created using Association Ethertype Filters Filters you created using Association IP Port Filters Setting Up Hardware Defining the Ethernet Advanced Settings Ssid Disallowed under Association Address Filters Allowed under Association Address Filters Set as disallowed under Association Address Identifying the 11b Radio Port Configuring the 11b RadioUse this option to configure the device’s 11b radio Procedure Selected value is displayed Primary Port? From the list, select one of the followingEthernet Identification , Association IP Protocol Filters Setting Up 11b Radio FiltersAssociation Ethertype Filters Defining the 11b Radio Hardware Settings IP Port Receive Transmit 18 11b Radio Hardware Settings Field Description Configuring Devices Field Description Field Description Defining the 11b Radio Advanced Settings Disallowed-The access point discards Association Address FiltersAll traffic except packets sent to the MAC Addresses set as allowed under Field Description None-Does not enable MIC NMH-Enables MIC Message IntegrityCheck, a security feature that protects This setting is valid Field Description Defining the 11b Radio Searched Channels Settings 20 11b Radio Searched Channels Settings Identifying the 11a Radio Port Configuring the 11a RadioUse this option to configure the device’s 11a radio Ethernet Identification, Setting Up 11a Radio Filters Ethertype Receive Transmit Defining the 11a Radio Hardware Settings Right pane 23 11a Radio Hardware Settings 78-14947-01 Configuring Devices Field Description Defining the 11a Radio Advanced Settings 24 11a Radio Advanced Settings LAN WEP Field Description Field Description Finish to save the template. See Finishing the Template, Defining the 11a Radio Searched Channels Settings Defining the 11a Radio Data Encryption Settings 26 11a Radio Data Encryption Settings Configuring Devices Defining the Security Settings Setting Local Admin AccessUse this option to configure the device’s security settings Use this option to enable or disable local admin access Adding Users Procedure Add Users-SeeAdding Users, Delete Users-SeeDeleting Users, Setting Local AP/Client Security Deleting Users 28 Local AP /Client Security Settings Field Description Setting Server-Based Security Use this option to set up server-based security Procedure 29 Server-Based Security Settings 100 101 Configuring Services 102 Configuring Start-Up Settings 103 104 Field Description 105 106 Configuring Console/Telnet Settings 107 ANSI-Use this setting to offer graphic Features such as reverse video buttonsUnderlined links 108 Configuring Hot Standby Settings 109 110 Configuring Routing Settings 111 Configuring CDP Settings 112 Configuring DNS Settings 113 Configuring FTP Settings Disable-Use this option if you networkSelect Services FTP. The Services FTP dialog box appears Does not use DNS FTP 115 Configuring Http Settings 116 Configuring Snmp Settings 117 Configuring Sntp Settings 118 Configuring Accounting Settings 119 120 121 122 123 124 Configuring EventsConfiguring Event Handling 125 126 127 128 Configuring Event Notification 129 Configuring Custom Values 130 Previewing the Template Key ValueClick Finish. See Finishing the Template, 131 Use this option to create a configuration template Creating a TemplateFinishing the Template 132 133 Copying a TemplateClick Edit. See Editing a Template, Use this option to edit a configuration template Use this option to delete a configuration templateEditing a Template Deleting a Template Importing a Template Click Import. The Import Template window appearsImport 135 136 137 Managing Configuration JobsExporting a Template Using the Templates, Job ChoicesNaming the Job Deleting a Job, Copying a Job, Viewing Job Run Details, Selecting Devices Job Name Enter a name for the jobDescription Enter a description of the job 139 140 Selecting a TemplateClick Select Template. The Select Template window appears 141 Scheduling a Job 142 Finishing the Job 143 Creating a Configuration Job Viewing Configuration Job StatusViewing the Job, Filtering a Job, Editing a Job, 144 Viewing the Job 145 146 RunningYou can stop a running job by clicking Stop Job Filtering a Job You can do the followingRefresh the screen-Click Refresh 147 Editing a Job Deleting a JobCopying a Job Click Delete Job Viewing Job Run Details 149 150 Viewing the Job Run Details TableJob Runs Details table displays the following information 151 Automating ConfigurationsAssigning a Startup Configuration Configuration Template dialog box appears 152 Creating a Startup Configuration Template Click Save to save the templateClick Delete to delete the template 153 154 Assigning an Auto-Managed ConfigurationTasks Template Choice Discover Device Credentials Http User/Password 155 Assigning Auto-Managed Configurations 156 157 Using Auto-Managed OptionsSelect Configure Auto Update Auto-Managed Configuration 158 Updating Device Firmware Managing Firmware Images Viewing Images on the Wlse Importing images-SeeImporting Images,Managing Firmware Jobs, Editing Image Details on the WLSE, When you finish editing, click Save Editing Image Details on the WlseImage Details window opens Deleting Images from the WLSE, Deleting Images from the Wlse Importing Images Importing Images from the Client System Desktop to the Wlse Details on the WLSE, Window is displayed. Complete the following Updating Device Firmware Managing Firmware Images Using a Remote Tftp Server for Image Upload Managing Firmware Jobs Managing Firmware Images, Click Job Name. The Job Name dialog box appears Selecting the Image Job Name Enter a name for the job. For guidelines on namingJobs, see Naming Guidelines, page A-1 A-1 Selecting Devices Scheduling the Job Email settings section Remote server settings section Validate and Save section Job Save Summary Window Job Validation Summary Window Details Using the Job Functions Creating a Firmware Job Job Name Job name Viewing Jobs by Job StateCreating a Firmware Job, Field Description Filtering Jobs Click OK in the popup windows Use this option to view details about a job Job Run Details Table Updating Device Firmware Managing Firmware Jobs Using Reports Using the Device Center For routers Viewing the Fault Summary Report Following table is displayed for the device’s fault summaryDetails, For more information, see Time Display Following table is displayed for the device’s history Viewing Config HistoryViewing Device History Viewing Firmware History Job Name Job Type Displaying Wireless Client Reports Displaying a Client Detail Report Address or name Click Search. a list appears in the left paneChose name, names are listed To export the report, click Export. See Exporting a Report, Displaying a Client Statistics Report Displaying a Client Historical Association Report Inventory Administration Discover Tasks HistoryReport, Group Reports Individual Access Point and Bridge ReportsDisplaying Current Reports Individual Switch Reports Displaying a Group ReportIndividual Router Reports Individual Server Reports Detailed Report, Fault Summary Report,Displaying an EAP Authentication Time the access point’s state last Displaying a Group Security Report Fault Summary-Viewing the Fault Authentication Report,Summary Report, Report-Displaying an EAP EAP Authentication Report, Displaying a Group Ssid Report Group Policy Report, Displaying a Group Vlan Report Vlan Name Name of the Vlan Column Description Displaying a Per Vlan Client Report Displaying a Group Policy Report Report-SeeDisplaying an AP IP Protocol Filters Report-SeeDisplaying an AP Ethertype ProtocolFilters Report, Report-See Displaying an AP IP Protocol Filters Report, Displaying an AP IP Port Filters Report, Displaying an AP Summary Report Current Client Association Report Authentication Report are also displayed Displaying a Detailed ReportFrom the Report Name list, select Detailed Report Displayed, one for each interface Unique identifier the client device uses to Column Description Displaying a Current Client Association Report Displaying an EAP Authentication Report From the Report Name list, select EAP Authentication Report Displaying an AP Ethertype Protocol Filters Report Displaying an AP IP Protocol Filters Report From the Report Name list, select AP IP Protocol Filters Displaying an AP IP Port Filters Report Displaying an AP Policy Report Displaying an AP IP Protocol Filters Report, From the Report Name list, select AP Policy ReportDisplaying an AP Ethertype Protocol Filters Report Displaying an AP Qbss QoS Report An AP IP Port Filters Report, 22 AP Qbss QoS Report Displaying an AP Ssid Report Unique identifier the client device uses to associateVlan identification number Vlan Name Vlan name Policy Report, Displaying an AP Vlan Report 24 AP Vlan Report 25 Per Vlan Client Report Displaying a Switch Summary Report From the Report Name list, select Switch Summary Report Displaying an AP and Bridge Connected to Switch Report Bridge Connected to Switch Report Displaying a Router Summary Report Displaying an AP and Bridge Connected to Router Report From the Report Name list, select Router Summary Report Displaying a Server Summary Report Displaying Trends Performance Report RF Utilization, Servers Displaying a Group Performance Report RF UtilizationGroup Performance Report Ethernet Utilization, 31 Group Performance Report RF Utilization Displaying a Group Performance Report Ethernet Utilization Channel Number Channel being used Displaying a Top N Number of Associations ReportUnique identifier the client device uses Displaying a Top N Percentage Errors From the Report Name list, select Top N Percentage Errors Period of time for which you want trending information Click View. a graph is displayed 36 AP and Bridge Ethernet Transmission Statistics Displaying Trends Displaying an AP and Bridge Performance Graph Displaying an AP and Bridge Performance Tabular Displaying Top N Busiest Clients View. The right pane refreshesPeriod of list, select the number of days Click View. The report is displayed From the Report Name list, select Top N Busiest Clients Displaying Top N Client Error Rate Displaying a Server Response Time Graph Click View. The following report displays Exporting a ReportEmailing a Report To send the email immediately, click Send Now Mailroute by selecting Administration Appliance ConfigureTo cancel the email, click Cancel Scheduling Email Jobs Viewing Email Job Details Report Properties Column Description Schedule Properties Column Description Email Properties ColumnSubject Format Body Performing Administrative Tasks Using Discovery and Managing Devices Managing Devices Manage Devices Device Details Pane View Device Management History Specifying Device Credentials Select Administration Discover Device Credentials Snmp Specify Community Strings Variable Description Community String Guidelines, Specify the Http Username and Password Community String Guidelines Managing Device Discovery Overview Discovery, Set Up Devices, Overview Discovery Set Up Devices Set Up Access Points and BridgesTasks Procedure Importing Devices, Managing Devices, Add New User. The User Password, Specify the Http UsernameYou can use the same Click User Information then click User that you created Set Up Routers and Switches Task Procedure Set Up AAA Servers Contact commandLocation command Contact contact command Wlse Enable Discovery Options Enabled? Affect on Display Set Up Discovery Filters Manage Devices, All devices are discovered Schedule DiscoveryInclude Rules Exclude Rules Defined? Result Procedure Select Administration Discover Discover Run Discovery Now. Run Discovery NowSpecifying Device Credentials, Run Discovery Now Seeds dialog box appears Related Topics Running Inventories About Scheduled InventoriesViewing Inventory and Discovery Task History, Discovery Task History, Immediate Inventory of Selected Devices Immediate Inventory of All Devices Viewing Inventory and Discovery Task History Name Type of Job Importing Devices From a file see Import Devices from a File, Import Devices from a File Import Devices from CiscoWorks2000 Import Devices from a File, Schedule Discovery, Exporting DevicesPortportnumber Type Information Description Serveripaddress on portportnumber To add, modify or delete a Leap server Adding, Modifying and Deleting AAA ServersManage Leap Servers To add a Leap server Text Box Description Manage Radius Servers Manage EAP-MD5 Servers Overview Groups, Creating, Editing, and Deleting Groups, Managing GroupsOverview Groups System-Defined Groups Creating, Editing, and Deleting Groups Add a GroupUser-Defined Groups Add a Group, Edit a Group, Delete a Group, Creating a New Group Naming Guidelines, page A-1 Your new group will be added to the Subgroup Of list Copying an Existing GroupBox optional Edit a Group Edit a Group, Delete a Group, Overview Groups, Delete a Group Add a Group, Delete a Group, Overview Groups, Managing the Appliance Overview Groups, Edit a Group, Add a Group, Viewing Wlse Status Viewing Log File Reports Wlse maintains the following log files Log File ContentLog Files Displayed Managing Device Discovery, Running Inventories, Restarting the Wireless LAN Solution EngineManaging the Software Viewing Software Status Defining the Repository To define or redefine the repository, complete the following Find the software you want on the FTP site Creating a Local RepositoryRepository source ftp//hostname/path Creating a Local Repository, Creating a Remote RepositoryRepository add package Installing Software Updates Browsing the Repository Software Update History window displays the following Viewing Software Update HistoryInstalling Software Updates, Managing the Software, Installation Overview Security Radius MS NT Domain Overview Authentication ModulesManaging Security Selecting an Authentication Module Selecting an Authentication Module, Administering Users, Select Administration Appliance Security SSL HTTPS. The SSL Managing SSL HttpsOverview Security, Https dialog box appears Disabling or Enabling Telnet and Selecting SSH # firewall eth0 Select Administration Appliance Security Last 10 Logins Viewing the Last 10 Logged-On Users Specifying the Backup Location Backing Up and Restoring Data Click Test Click OK Select Administration Appliance Backup and Restore BackupSelect Start Settings Control Panel Add/Remove Programs Select Administration Appliance Backup and Restore Restore Backing Up Data Restoring Data Using DiagnosticsBacking Up Data, Specifying the Backup Location, Viewing and Creating a Self-Test Report, Viewing Processes, Viewing and Creating a Status ReportViewing and Creating a Self-Test Report Viewing Processes Viewing and Creating a Status Report, Viewing Processes,Report displays the following Processes displayed, see Processes Displayed, Return code represents normal program operation. Any Processes Displayed Daemon InformationProcess Name Description Daemon Information dialog box displays the following System Log Setting Up the Splash Screen MessageSetting the Current Time and Date on the Wlse To set the UTC time, use the following CLI command Select Administration Appliance TIME/NTP/NAMESpecifying NTP Time Servers Clock set hhmmss month day year Specifying an Smtp Mail Server Select Administration Appliance Configure MailrouteSpecifying Name Servers Using Connectivity Tools Managing System Parameters Parameter DescriptionInventory Performance Attributes Polling Interval Jobs, and Reports Scheduled Email Jobs Shown in Configure Jobs, FirmwareInventory Performance Attributes Polling Modifying Your Profile, Administering UsersManaging Roles Naming Guidelines, page A-1 Managing Users, Managing Users Add UsersUse this option to Add Users, Modify Users, Delete Users, Modify Users To modify a user Naming Guidelines, page A-1 Managing Roles, Wireless LAN Solution Engine -From the online helpLevel, see the User Guide for the CiscoWorks Use the My Profile tab to change your password Select Administration My Profile Change passwordModifying Your Profile Delete Users Linking to a CiscoWorks2000 Server 78-14947-01 Frequently Asked Questions Frequently Asked Questions Troubleshooting Faults, Configure, Firmware, Reports, Administration, Faults Feature Symptom Probable Cause Possible Solution Configure ConfigureSee Set Up Devices Configure Jobs Administration Discover Http User/PasswordHttp credentials Device Credentials Access point or bridge Access point or bridge hasHave firmware rights Community string on Selecting Administration Appliance Status ViewCheck if the Job Run Detail Job Run Log to identify Select Administration Enter services stopEnter services start Credentials Snmp Firmware Jobs Create FirmwareFirmware Jobs Reports ReportsLog File Click jobvm.log Enter services stop to Enter services start toTime, select Administration Wireless Clients Administration Enter services stop to stop Administration Appliance Run Discovery Now. See Managing Discovered in AdministrationDiscover Schedule Discovery or Authentication AdminUser Admin Security Name and Description Allowable Characters Character Description Example Type Rules Command Reference Using the CLI Command PrivilegesChecking Command Syntax CLI Conventions Command History Feature Help for CLI Commands Command Summary 151 Reboots the system Reload section on page B-39 Configures an Ethernet interface Interface section on B-30Debugs and tests email settings Mail section on page B-34 Wireless LAN Solution Engine’s B-44 Local repository Lists, starts, or stops management Services section on B-46Configuration On page B-50 Reinitializes the database Reinitdb section on B-40 Engine’s Web access log On page B-57 Displays the Wireless LAN Solution Show weberrorlog sectionEngine’s Web error log On page B-58 Displays the Wireless LAN Solution Show websslaccesslog Displays the Wireless LAN Solution Show snmp-server section Engine’s Snmp configuration On page B-66B-66 Displays syslog information Show syslog section on B-67 Command Description Conventions Configures an snmp agent Snmp-server section on B-71Configures Telnet access Telnetenable section on B-73 Telnets to an external host Telnet section on page B-72 Privilege Level 0 Commands ExitPing Syntax Description Show clock Show clockUsage Guidelines Related Commands Show domain-nameClock Ntp server Show domain-name Show interfaces Show processShow interfaces Interface Displays command output one screen at a time. Press Exit paged output and return to the command promptShow version Show version Traceroute Ping Traceroute -m 20 -w 10 cisco.com Privilege Level 15 Commands Auth Backup Backup testBackupconfig Listbackup Restore Show backupconfig Test Backupconfig Backupconfig hostname username password directoryNo backupconfig Backup Listbackup Restore Timer CdpRun Holdtime Clock Set Clock set 160000 dec 11 This command sets the date and timeNtp server Show clock Erase config Erase configThis command erases the system configuration Erase config Firewall eth 0-5public private icmp telnet ssh snmp https FirewallExamples Gethostbyname HostnameGethostbyname host Hostname name Import No import host hostname ipaddress hostsHost Hosts Install configure Install configure URL URL Value default saveDefault No import hosts Install list Install list all full page updatesUpdates All Install update Install update package nameFollowing command installs the update EX-2.0 Install update EX-2.0 Default Interface This command disables the Ethernet 1 interface Ip domain-nameIp domain-name name no ip domain-name name Name Domain name e.g. cisco.com Ip name-server Ip name-serverIp name-server ip-address No ip name-server ip-address Ip-address Name server IP address maximum Listbackup ListbackupIp domain-name Ip name-server Backup Backupconfig Restore Show backupconfig MailMail to user@host debug User@host Following command clears the WLSE’s email log Mailcntrl clearMailcntrl list Mailcntrl clear log sendqueue userqueue Mailroute NslookupMailroute hostname ip-address Nslookup dns-name ip-address Nslookup hostname Ntp serverNtp server ip-address No ntp server ip-address This command configures the system to use an NTP server No ntp server ip-addressNtp server ip-address Ntp server Reload ClockReload Shutdown Reinitdb RepositoryReinitdb Repository source URL Repository add Repository source ftp//209.165.200.224 Package Repository deleteRepository delete package all Repository list Repository list local remote detailRemote Detail Following command stops the local repository Repository serverRepository server stop start status Repository list local detail Restore Releated CommandsRestore restore name Backup Backupconfig Listbackup Show backupconfig Services Services command Services status start stopRoute Netmask This command stops management services This command starts management servicesThis command shows services status # services status Show anilog Show anilog page include MatchString1 MatchString2Include Matchstring1 Show auth-cli Show auth-httpShow auth-cli Show auth-http Show backupconfig Backup Backupconfig Listbackup RestoreShow backupconfig Show auth-http Show bootlog Show bootlogDisplays command output one screen at a time. Press Exit paged output and return to the command prompt Show cdp neighbor Show cdp runReload Clock Show cdp neighbor This command displays the CDP configuration Show collectorlogShow collectorlog page include matchstring1 matchstring2 Show cdp run This command displays the system configuration Show configShow config Show daemonslog Show daemonslogShow daemonslog page include matchstring1 matchstring2 Show dmgtdlog Show dmgtdlogShow dmgtdlog page include matchstring1 matchstring2 Show webaccesslog Show webaccesslogShow webaccesslog page include matchstring1 matchstring2 Show weberrorlog Show weberrorlog page include matchstring1 matchstring2 Show websslaccesslog Show websslaccesslog page include matchstring1 matchstring2Show import Show import hosts Show install logs This command displays the imported host fileShow install logs short long Show ipchains Show hosts Show hostsShow ipchains eth0 Show hosts Show proc command Show maillogShow proc Show maillog page include matchstring1 matchstring2 Displays command output one screen at a time Show repository status access-logAccess-log Show repository This command displays the currently configured routes Show routeShow securitylog Show route Show securitylog This command displays the type of SSH that is enabled Show snmp-serverShow ssh-version Show snmp-server Related Command To display syslog information, use the show syslog commandThis command displays syslog information Show syslog Show telnetenable Telnetenable command Show telnetenableShow tech Show tech Following command shows if Telnet is enabled or disabled Show telnetenableShow tomcatlog Show tomcatlog page include matchstring1 matchstring2 Shutdown This command shuts down the systemShutdown Snmp-server SshCommunity Location Ssh1 Enables SSH Ssh2 Both Enables both SSH 1 and SSH2 Ssh-versionTelnet Ssh-version ssh1 ssh2 both Telnetenable Telnetenable enable ip-addresses domains disable statusEnable Disable Username Maintenance Image Commands This command removes the user accountUsername user1 password password1 privilege No username user1 To check and repair the filesystem, use the fsck command Following command checks and repairs the filesystemFsck Fsck GL-1 See wireless bridgeSee also EAP-MD5 server , Leap server , and Radius GL-2 Lower-layer protocol to treat its messagesNeed them Group of related faults See also AAAServers to transfer files, such as text and graphic files Secure Http with SSL secure socket layer. See also SSL Media Interface Connector. Fddi de facto standard connector May still be used in older wireless networksSee also AAA and WEP keys GL-4 Reflects their transmission quality and service availability GL-5 GL-6 Including passwordsUp to 32 characters long Called Greenwich Mean Time GMT and Zulu time GL-7 GL-8 Configured as an access pointWEP keys Numerics IN-1 IN-2 IN-3 CLI IN-4 IN-5 CLI B-2 IN-6 IN-7 IN-8 IN-9 GUI IN-10 IN-11 IN-12 IN-13 IN-14 IN-15 IN-16 SSL IN-17 IN-18 IN-19 IN-20