Cisco Systems 1105 manual Ftp, 115

Chapter 3 Configuring Devices

Using the Templates

Step 2 Complete the following:

Note Clicking Clear removes all the current entries in the window and any entries you have made in other Template windows up until that point.

Table 3-36 FTP Settings

Field	Description
File Transfer Protocol (FTP)	From the list select one of the following:
	•	TFTP
	•	FTP
Default File Server	Enter the IP address or DNS name of the file
	server where the access point should look for
	FTP files.
FTP Directory	Enter the file server directory that contains
	the firmware image files.
FTP User Name	Enter the username assigned to your FTP
	server.
	You do not need to enter a name in this field
	if you selected TFTP.
FTP User Password	Enter the password associated with the file
	server’s username.
	You do not need to enter a password in this
	field if you selected TFTP.

Step 3 Select one of the following in the left pane:

•Preview to see your changes before you apply them. (See Previewing the Template, page 3-131.)

•Finish to save the template. (See Finishing the Template, page 3-132.)

•Another template category to configure more options. (See Template Categories, page 3-2.)

	User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14947-01		3-115