Cisco Systems 1105 manual Configuring Start-Up Settings, 103

Chapter 3 Configuring Devices

Using the Templates

Configuring Start-Up Settings

Use this option to configure the access point for your network's BOOTP or DHCP servers for automatic assignment of IP addresses.

Procedure

Step 1 Select Services > Start-Up.The Services: Start-Up dialog box appears.

Step 2 Complete the following:

Note Clicking Clear removes all the current entries in the window and any entries you have made in other Template windows up until that point.

Table 3-30 Start-Up Settings

Field	Description
Configuration Server Protocol	From the list, select one of the following:
	• None—Use this setting if your network
	does not have an automatic system for IP
	address assignment.
	• BOOTP—Use this setting if IP addresses
	are hard-coded based on MAC
	addresses.
	• DHCP—Use this setting if IP addresses
	are “leased” for predetermined periods
	of time.
Use prior Config Server settings	From the list, select one of the following:
if no server responds?	• yes—Use this setting to have the access
	point save the boot server's most recent
	response.
	• no—Use this setting to not use the most
	recent response.

	User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14947-01		3-103