Cisco Systems 1105 manual Variable Description, Community String Guidelines

Chapter 6 Performing Administrative Tasks

Using Discovery and Managing Devices

Table 6-3 Community String Guidelines

Variable	Description	Notes
target	The IP address of a device	If you do not specify a target,
	or range of devices that	the default community strings
	use these community	apply to all devices in the
	strings.	network.
read_community	A password allowing	You must specify the read
	read-only access to the	community string. Otherwise,
	target devices.	the default value of public is
		used.
timeout	The length of time	The default is 10 seconds. If
	(seconds) the server waits	you increase the timeout
	for a response from the	period, discovery could take
	device before performing	significantly longer to
	the first retry.	complete. The minimum value
		is one and the maximum value
		is 60.
retries	Number of attempts the	The default is one retry. If you
	server makes to	increase the number of retries,
	communicate with the	discovery takes significantly
	device before declaring	longer to complete. The
	that the device has timed	default retry policy doubles
	out.	the previous timeout value for
		retry.
write_community	The password that allows	You must specify the write
	write access to the target	community string. Otherwise,
	devices.	the default value of public is
		used.

Step 3 To modify an entry, make your changes directly in the large textbox.

Step 4 Click Save to apply your changes.

Related Topic

Community String Guidelines, page 6-9

	User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
6-8	78-14947-01