Cisco Systems 1105 manual Configuring Devices

Chapter 3 Configuring Devices

		Using the Templates
Table 3-4	Ethertype Filter Special Cases Settings (continued)
Field		Description
Priority		From the list, select one of the following:
		• Default—This setting is the same as best effort, which
		applies to normal LAN traffic.
		• Background—Use this setting for bulk transfers and other
		activities that are allowed on the network but should not
		impact network use by other users and applications.
		• Excellent Effort—Use this setting for a network’s most
		important users.
		• Controlled Load—Use this setting for important business
		applications that are subject to some form of admission
		control.
		• Interactive Video—Use this setting for traffic with less
		than 100 ms delay.
		• Interactive Voice—Use this setting for traffic with less than
		10 ms delay.
		• Network Control—Use this setting for traffic that must get
		through to maintain and support the network infrastructure.

Time to Live (msec)

unicast	Enter the number of milliseconds unicast packets should stay in
	the access point’s buffer before they are discarded.
multicast	Enter the number of milliseconds multicast packets should stay
	in the access point’s buffer before they are discarded.
Alert	From the list, select one of the following:
	• yes—Use this setting to send an alert to the event log when
	a user transmits or receives the protocol through the access
	point.
	• no—Use this setting to not send an alert to the event log.

Step 3 Click Add. The new name is added to the list box.

	User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14947-01		3-17