Cisco Systems 1105 manual Address or name, Click Search. a list appears in the left pane

Chapter 5 Using Reports

			Displaying Wireless Client Reports
Step 2	From the list, select the method you want to use to search for clients: by MAC
	address or name.
Step 3	Enter the MAC address or name. You can use an asterisk (*) as a wildcard to
	denote numbers and letters.
	Note	The MAC address must be entered in hexadecimal, for example
		0070eb37c90.
Step 4	Click Search. A list appears in the left pane.
	If you chose MAC address in the previous step, MAC addresses are listed; if you
	chose name, names are listed.
Step 5	Click the MAC address or name. The right pane refreshes and displays the Client
	Detail Report, which is the default report, with the following information:
	Table 5-5 Client Detail Report
	Column		Description
	Name		The name assigned to the wireless client
			device.
	IP Address		The IP address of the wireless client device.
	Classification		The type of wireless client device.
	Associated with		The name or IP of the access point with
			which it was last associated.
	State		The operational state of the wireless client
			device.
	Time last seen		The time the client was last seen by the
			system.
	Software Version		The version of wireless client software.
	MAC Address		The MAC address of the wireless client.

Step 6	To export the report, click Export. (See Exporting a Report, page 5-66.)
Step 7	To email the report, click Email Report. (See Emailing a Report, page 5-66.)
	User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14947-01		5-7