Cisco Systems 1105 manual Displaying an EAP Authentication Report

Chapter 5 Using Reports

Displaying Current Reports

Step 5 Click View. The group report is displayed with the following headings:

Table 5-16 Current Client Association Report

Column	Description
Name	The name of the client associated with the access point.
IP Address	The IP address of the wireless client.
MAC Address	The wireless client’s MAC address.
Device Type	The wireless client device type.
As Of	The time the device was last seen by the system.
	For more information, see Time Display, page 1-5.
State	The operational state of the device.

Step 6 To sort table data, click on the column heading you want to use to sort the data:

•A triangle indicates ascending order.

•An upside-down triangle indicates descending order.

•No triangle indicates that the data is not sorted.

Step 7 To export the report, click Export. (See Exporting a Report, page 5-66.)

Step 8 To email the report, click Email Report. (See Emailing a Report, page 5-66.)

Displaying an EAP Authentication Report

This device report lists all the authentication servers that are configured for the access point.

Procedure

Step 1 Select Reports > Current. The window refreshes with a device selector in the left pane.

	User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
5-30	78-14947-01