Cisco Systems 1105 manual From the Report Name list, select EAP Authentication Report

Chapter 5 Using Reports

Displaying Current Reports

Step 2 If you want to search for the device, use the dialog box in the left pane above the device selector:

a.From the list, select the method you want to use to search for the device: by name or by IP address.

b.Enter the IP address or name, or use an asterisk (*) as a wildcard to denote numbers and letters, then click Search. The requested device appears in the Search Results folder.

Step 3	From the device selector in the left pane, click to expand the folder and select the
	access point for which you want a report. The right pane refreshes.
Step 4	From the Report Name list, select EAP Authentication Report.
Step 5	Click View. The report is displayed with the following headings:
	Table 5-17 EAP Authentication Report
	Column	Description
	Server Name	The name of the authentication server.
	Server Protocol	The protocol used by the server.
	Server Priority	The priority of the server when multiple servers are
		configured for the same service.
	Server Port	The communication port setting used by the access point
		and the server.

	User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14947-01		5-31