Cisco Systems 1105 manual Configuring Devices

Chapter 3 Configuring Devices

	Using the Templates
Table 3-1 Express Template Settings (continued)
Field	Description
Configuration Server Protocol	Set this entry to match the network’s method
	of IP address assignment.
	From the list, select one of the following
	options:
	• None-Static IP—Use this if your
	network does not have an automatic
	system for IP address assignment.
	• BOOTP—Use this if your network uses
	Bootstrap Protocol, in which IP
	addresses are hard-coded based on MAC
	addresses.
	• DHCP—Use this if your network uses
	Dynamic Host Configuration Protocol,
	in which IP addresses are “leased” for
	predetermined periods of time.
Default Subnet Mask	Enter an IP subnet mask to identify the
	subnetwork so the IP address can be
	recognized on the LAN.
	If DHCP or BOOTP is not enabled, this field
	is the subnet mask.
	If DHCP or BOOTP is enabled, this field
	provides the subnet mask only if no server
	responds to the access point's DHCP or
	BOOTP request.
Default Gateway	Enter the IP address of your default Internet
	gateway.
	The entry 255.255.255.255 indicates no
	gateway.

	User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14947-01		3-5