5-13
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14947-01
Chapter5 Using Reports Displaying Current Reports
Procedure
Step 1 Select Reports > Current. The window refreshes with a device selector in the left
pane.
Step 2 From the device selector in the left pane, click to expand the folder for the group
reports you want to view. The right pane refreshes.
Step 3 From the Report Name list, select Group Report.
Step 4 Click View. The group report is displayed with the following headings:
Table5-8 Group Report
Column Description
Number of Clients Associated to
this Group The total number of clients currently
associated with the group of access points
or bridges.
Count of Active Stations in this
Group The number of access points or bridges
currently in the group.
As Of The time the state of the group last
changed.
For more information, see Time Di s play,
page 1-5.
AP Name The name of the access point.
Click to view the following:
•AP Detailed Report—See Displaying
a Detailed Report, page5-26.
•Fault Summary—See Viewing the
Fault Summary Report, page 5-3.
•EAP Authentication Report—See
Displaying an EAP Authentication
Report, page5-30.
AP IP Address The IP address of the access point.
Click to open up a browser window to the
AP Summary Status.