Cisco Systems 1105 manual Displaying a Router Summary Report, Fault Summary Report

Chapter 5 Using Reports

Displaying Current Reports

Step 5	Click View. The report is displayed with the following headings:
	Table 5-27 AP and Bridge Connected to Switch Report
	Column	Description
	Device Port	The device port.
	AP Name	The name of the access point or bridge connected to the
		switch.
	AP IP Address	The IP address of the access point or bridge connected to
		the switch.
	Status (Fault)	The fault status.
		Click for details. For more information, see Viewing the
		Fault Summary Report, page 5-3.
Step 6	To export the report, click Export. (See Exporting a Report, page 5-66.)
Step 7	To email the report, click Email Report. (See Emailing a Report, page 5-66.)

Displaying a Router Summary Report

Procedure

Step 1 Select Reports > Current. The window refreshes with a device selector in the left pane.

Step 2 If you want to search for the device, use the dialog box in the left pane above the device selector:

a.From the list, select the method you want to use to search for the device: by name or by IP address.

b.Enter the IP address or name, or use an asterisk (*) as a wildcard to denote numbers and letters, then click Search. The requested device appears in the Search Results folder.

Step 3 From the device selector in the left pane, click to expand the folder and select the router for which you want a report. The right pane refreshes.

	User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14947-01		5-47