Cisco Systems 1105 manual Setting Up Ethernet Filters

Chapter 3 Configuring Devices

Using the Templates

Step 2 Enter the following information to identify the port:

Table 3-12 Ethernet Port Settings

Field	Description
Primary Port?	From the list, select one of the following:
	• Ethernet—Sets the Ethernet port for all
	access points other than AP1200’s as the
	primary port.
	• Ethernet AP 1200—Sets the Ethernet
	port for AP1200 access points as the
	primary port.
	• Radio 11b—Sets the 11b radio port as
	the primary port.
	• Radio 11a—Sets the 11a radio port as
	the primary port.
Adopt Primary Port Identity?	From the list, select one of the following:
	• yes—This adopts the primary port
	settings (MAC and IP addresses) for the
	Ethernet port.
	• no—This uses different MAC and IP
	addresses for the Ethernet port.

Step 3 Select one of the following in the left pane:

•Preview to see your changes before you apply them. (See Previewing the Template, page 3-131.)

•Finish to save the template. (See Finishing the Template, page 3-132.)

•Another template category to configure more options. (See Template Categories, page 3-2.)

Setting Up Ethernet Filters

Use this option to define filters for the Ethernet port, the IP Protocol, and the IP Port.

	User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
3-50	78-14947-01