![](/images/new-backgrounds/1306162/30616239x1.webp)
4.Press and hold SETUP until the CBL key blinks twice.
RE-ASSIGNING DEVICE KEYS
The Atlas PVR Universal Remote Control can be set up to control a second device of an
NOTE: | AUX is preset at the factory to control an RCA |
| VCR. Performing the steps below will over- |
| write those settings. |
1.On the remote control, press AUX once; it will blink once. Then press and hold SETUP until the AUX key blinks twice.
2.Enter 9 9 2. The AUX key will blink twice.
3.Press DVD once, then press AUX once. The AUX
key will blink twice.
The AUX key is now ready to be programmed for your second DVD player. See “Programming Device Control” on page 8. To
NOTE: Only one device can be assigned to an unused device key at a time.
To | Perform Key Sequence |
|
|
AUX as 2nd AUXÆSETUPÆ9Æ9Æ2ÆAUDÆAUX AUD key
AUX as 2nd AUXÆSETUPÆ9Æ9Æ2ÆTVÆAUX TV key
AUX as 2nd AUXÆSETUPÆ9Æ9Æ2ÆCBLÆAUX CBL key
AUX back to AUXÆSETUPÆ9Æ9Æ2ÆAUXÆAUX AUX
To
20