Shaw ATLAS PVR Universal Remote Control manual Programming a Learned Key

•Learned keys are mode-specific, so each one can store a unique function for each mode.

•Do not use the following keys for learning: Device Keys, SETUP, Record (•), Tune-In Keys.

•Learning capacity is approximately 16 to 25 keys, depending on the code being learned.

•Certain device functions are not learnable including multi-frequency types, some high frequency ones, and other unusual formats.

•For optimum learning, avoid high levels of ambient light such as natural sunlight or energy-efficient fluorescent lights.

NOTE: Please have your original remote controls handy before programming learning.

Programming a Learned Key

NOTE: If more than 15 seconds pass between key presses, the remote exits programming.

1.Press and hold SETUP until the last-selected

mode key blinks twice, then press 9 7 5.

NOTE: If the LED displays one long flash instead, either your batteries are low, or the Atlas PVR Universal Remote Control has a memory fault. In either case, the remote will not learn a new key. See “Additional Information” on page 23.

2.Press a mode key once (i.e., AUX, DVD, AUD,

TV, or CBL) to assign a mode for learning, then the key that will learn the new code.

3.Place the Atlas PVR Universal Remote Control head-to-head (about 2" apart) from your original remote control. Also locate the key (on your original remote control) that you want the Atlas PVR Universal Remote Control to learn.

2"

4.On the original remote, press and hold the key to be learned. The Atlas PVR Universal Remote Control’s LED will blink rapidly, then

13