7.To search for the codes of your other devices, repeat steps 1 through 5, but substitute the appropriate key (e.g., AUX, DVD, AUD, or CBL) for the device you are searching for.
CHECKING THE CODES
If you have set up theAtlas PVR Universal Remote Control by searching for your device code (on the previous page), you may need to find out which four- digit code is operating your equipment.
For example, to find out which code is operating your TV:
1.On the remote control, press TV once; it will blink once. Then press and hold SETUP until
the TV key blinks twice.
2.Enter 9 9 0. The TV key will blink twice.
3.To view the code for the first digit, press 1
once. Count the number of times the TV key blinks (e.g., 3 blinks = 3) and write down the number in the leftmost TV Code box on page 10.
NOTE: If a code digit is 0, the selected mode key will not blink.
4.Repeat step 3 three more times for the
remaining digits. Use 2 for the second digit, 3 for the third digit, and 4 for the fourth digit. Finish writing down the code in the TV Code boxes on page 10.
5.To check for other device codes, repeat steps 1 through 4, but substitute the appropriate key (e.g., AUX, DVD, AUD, or CBL) for the device you are checking. Write down the codes in the appropriate boxes on page 10.
USING LEARNING
The Atlas PVR Universal Remote Control includes a Learning feature so you can add functions that are unique to your home entertainment devices (e.g.,VCR Tracking Up or Down). However, there are some considerations.
Learning Precautions
•Your original remote controls must be in working order for learning to work properly.
12
