![](/images/new-backgrounds/1306162/30616219x1.webp)
DVD Code
Device Type:___________________
AUD Code
Device Type:___________________
CBL Code
Device Type:___________________
TV Code
Device Type:___________________
PROGRAMMING TV/VCR COMBO CONTROL
If you own a TV/VCR Combo, perform the following instructions to control this device:
1.Turn on your TV/VCR Combo and insert a video cassette.
2.On the remote control, press AUX once; it will blink once. Then press and hold SETUP until
the AUX key blinks twice.
3.Use the “Manufacturer’s Codes” starting on page 24 to locate the brand name and enter the first
NOTE: If the AUX key did not blink twice after enter- ing the codes last digit, repeat steps 2 through 3 and try entering the same code again.
If you’ve located a TV/VCR setup code that works for your TV/VCR Combo and a separate TV code is also listed, you’ll need to program this code into the remote control to access vol- ume control (see “Programming Device Con- trol” starting on page 8).
10