turn off. Continue holding the key on the original remote until the Atlas PVR Universal Remote Control’s LED blinks twice.
NOTE: If the LED displays one long blink, a learning error has occurred. Try repeating this step
again until a successful capture occurs. If the function is still not captured, press and hold SETUP to exit programming and review the
“Learning Precautions” on the previous page. If needed, also see “Troubleshooting” on page 21. After review, start programming again at step 1.
5.Repeat steps 2 through 4 for another mode
and/or key or press and hold SETUP to exit programming.
Deleting a Single Learning Key
This process returns the key to its original programming for the mode you select. You can also delete learned programming by teaching a different function to the key (see “Programming a Learned Key” on page 13)
NOTE: If more than 15 seconds pass between key presses, the remote exits programming.
1.Press and hold SETUP until the
mode key blinks twice, then press 9 7 6.
2.Press a mode key once (i.e., AUX, DVD, AUD,
TV, or CBL).
3.Press the key containing the learned function to be deleted twice. The remote will blink twice.
4.Repeat steps 2 through 3 for another key or
press and hold SETUP to exit programming.
Deleting All Learned Keys in a Specific Mode NOTE:
1. | Press and hold SETUP until the |
| mode key blinks twice, then press 9 7 6. |
