INSTALLING BATTERIES
❶
❷
❸
1.On the back of the remote control, push the tab and lift off the battery cover.
2.Locate the two (2) enclosed AA batteries. Match the + and - marks with those in the battery case, then insert them.
3.Align the cover’s keys with the case’s holes and press the cover back into place. The tab should click when the cover is locked.
4.Test the remote control by pressing any mode key (e.g., TV). If the batteries are inserted
correctly, the LED (red light) will blink once.
NOTE: When batteries need replacement, the remote control will cease to operate. Replace the batteries and the unit will be restored to its full functionality, complete with your favorite settings.
PROGRAMMING DEVICE CONTROL
The Atlas PVR Universal Remote Control is preprogrammed to operate the cable box (converter) provided by your cable system, an RCA TV, a Toshiba DVD player, an RCA VCR (as an AUX device), and a Pioneer audio receiver. To control devices other than the default brands, perform the following steps; otherwise skip this section.
8
