Cisco Systems 1105 manual From the Report Name list, select AP IP Protocol Filters

Chapter 5 Using Reports

Displaying Current Reports

Procedure

Step 1 Select Reports > Current. The window refreshes with a device selector in the left pane.

Step 2 If you want to search for the device, use the dialog box in the left pane above the device selector:

a.From the list, select the method you want to use to search for the device: by name or by IP address.

b.Enter the IP address or name, or use an asterisk (*) as a wildcard to denote numbers and letters, then click Search. The requested device appears in the Search Results folder.

Step 3	From the device selector in the left pane, click to expand the folder and select the
	access point for which you want a report. The right pane refreshes.
Step 4	From the Report Name list, select AP IP Protocol Filters.
Step 5	Click View. The report is displayed with the following headings:
	Table 5-19 AP IP Protocol Filters Report
	Column	Description
	Filter Set Id	The identification number of the filter set.
	Filter Set Name	The name of the filter set.
	Default	The type of disposition configured: Forward (to forward
	Disposition	protocol traffic, or Block (to block protocol traffic).
	Filter Special Case	The special case configuration.
	IP Protocol
	Filter Special Case	The special case disposition.
	Disposition
	Filter Special Case	The priority configuration based on the traffic type.
	Priority
	As Of	The time the access point’s state last changed.
		For more information, see Time Display, page 1-5.

	User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
5-34	78-14947-01