Cisco Systems 1105 manual Report, Administration Discover Tasks History, Inventory

Chapter 5 Using Reports

Displaying Wireless Client Reports

Step 5	Select the MAC address or name. The right pane refreshes.
Step 6	From the Report Name list, select Client Historical Association Report.
Step 7	Click View. The Client Historical Association Report displays in the right pane
	with the following information:
	Table 5-7 Client Historical Association Report
	Column	Description
	Associated with	The name or IP address of the AP.
		Click on this link to view the AP Summary Report and
		the Fault Summary.
		For more information, see Displaying an AP Summary
		Report, page 5-24.
	Client IP Address	The IP address of the wireless client device.
	Software Version	The software version of the wireless client device.
	Associated Time	The time when the WLSE has polled the access point
		to retrieve the client association time.
		Tip	To ensure that you are viewing the most
			up-to-date information, verify when the last
			inventory cycle occurred. Client inventory
			status can be seen by selecting
			Administration > Discover > Tasks History
			> Inventory.

Step 8 To sort table data, click on the column heading you want to use to sort the data:

•A triangle indicates ascending order.

•An upside-down triangle indicates descending order.

•No triangle indicates that the data is not sorted.

Step 9 To export the report, click Export. (See Exporting a Report, page 5-66.)

Step 10 To email the report, click Email Report. (See Emailing a Report, page 5-66.)

	User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
5-10	78-14947-01