3-151
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14947-01
Chapter3 Configuring Devices Automating Configurations
•To undo the selected configuration job, click Undo.
The Undo feature is not supported for the following:
–
Custom Values
–
Security options: Local Admin Authentication under the Local Admin
Access; Encryption Key Values under Local AP/Client Security; Shared
Secret under Server-Based Security; and Shared Secret under
Accounting.
–
FTP username and password
–
Previously undone jobs
–
Routing table configurations (for versions prior to 11.23T only)
–
Adding a user in place of an existing user on the access point. The Undo
feature works for new users.
Automating Configurations
This window allows you to automatically upload configuration templates to
access points and bridges. Use this feature to:
•Apply startup templates through the DHCP server to newly-installed devices
with manufacturer-default configurations.
•Apply a common template to devices after they are discovered, auto managed,
and the WLSE has their inventory information.
The topics covered in this section are:
•Assigning a Startup Configuration, page 3-151
•Assigning an Auto-Managed Configuration, page 3-154

Assigning a Startup Configuration

The startup configuration is used for newly-installed devices that have a
manufacturer-default configuration. After the d ev ices ar e pow ered on and rece iv e
an IP address from a DHCP server, the startup configuration will be automatically
uploaded to the devices.