3-143
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14947-01
Chapter3 Configuring Devices Managing Configuration Jobs
Finishing the Job
Procedure
Step 1 Click Finish in the left pane to complete creating a job. The Finish dialog box
appears in the right pane.
Step 2 If you want email notification of job completion, use the Email settings section:
Tip If email notification is not working, you may need to configure the
mailroute by selecting Administration > Appliance > Configure
Mailroute.
Step 3 Click Vali dat e if you want to check the job.
Note Jobs with templates containing custom key values are not validated.
A window displays a confirmation message if the job is successful, and an
informational message if the selected template in the job is not valid for the
selected devices.
Note It is recommended that you always validate a job before saving it, and to
eliminate any errors before saving it. If a job is saved with errors, the
devices associated with the errors are ignored when the job runs.
Field Description
On completion, email to Enter a comma-separated list of email
addresses to be notified when the job
completes.
Email only if job fails Select this checkbox if you want recipients to
be notified only if the job fails.