Chapter 4 Updating Device Firmware

Managing Firmware Jobs

Select the Ignore Warnings checkbox in the Warnings section of the Finish dialog box. By default, warnings are not ignored.

Error—The operation is not permitted. The image will not be applied to devices that have errors associated with them. It is recommended that you eliminate the errors before saving the job. If you save a job with errors, the corresponding devices will be ignored during the job run.

Creating a Firmware Job

Note Your login determines whether you can use this option.

Procedure

Step 1 Select Firmware > Jobs. The Jobs window appears.

Step 2 Enter a name for the job and click Create Job.

For guidelines on job names, see Naming Guidelines, page A-1.

Step 3 The window refreshes with the Job Creation menu in the left pane and the Job Name dialog box in the right pane.

Step 4 Select the numbered choices in the left pane to create a job. For information on these choices, see Job Choices, page 4-10.

Using the Job Functions

To view job status, select Firmware > Jobs. The Jobs window appears. This window allows you to view job status, filter a job, edit a job, view details about a job, and undo a job.

Job data is retained for 30 days by default. To change the retention period, see Managing System Parameters, page 6-73.

Note Your login determines whether you can use these options.

 

User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine

4-18

78-14947-01

Page 230
Image 230
Cisco Systems 1105 manual Creating a Firmware Job, Using the Job Functions