5-37
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14947-01
Chapter5 Using Reports Displaying Current Reports
Procedure
Step 1 Select Reports > Current. The window refreshes with a device selector in the left
pane.
Step 2 If you want to search for the device, use the dialog box in the left pane above the
device selector:
a. From the list, select the method you want to use to search for the d evice: by
name or by IP address.
b. Enter the IP address or name, or use an asterisk (*) as a w ildc ard to de note
numbers and letters, then click Search. The requested device appears in the
Search Results folder.
Step 3 From the device selector in the left pane, click to expand the folder and select the
access point for which you want a report. The right pane refreshes.
Step 4 From the Report Name list, select AP Policy Report.
Step 5 Click View. The report is displayed with the following headings:
Table5-21 AP Policy Report
Column Description
Policy Group Id The identification number for the policy group.
Policy Group
Name The name of the policy group.
Ethertype Filter Id
(In) The identification number of the (receive) Ethertype filter.
Click to see the AP Ethertype Protocol Filters Report—See
Displaying an AP Ethertype Protocol Filters Report,
page5-32.
Ethertype Filter Id
(Out) The identification number of the (transmit) Ethertype filter.
Click to see the AP Ethertype Protocol Filters Report—See
Displaying an AP Ethertype Protocol Filters Report,
page5-32.
IP Protocol Filter
Id (In) The identification number of the (receive) IP protocol
filter.
Click to see the AP Ethertype Protocol Filters Report—See
Displaying an AP IP Protocol Filters Report, page 5-33.