Cisco Systems 1105 manual Using Auto-Managed Options, 157

Chapter 3 Configuring Devices

Automating Configurations

Field	Description
Device Types	Note	Auto-managed templates for AP 350’s are applied
		to 350 bridges; you cannot assign a different
		template for bridges based on device type alone. If
		the bridges are running are different software
		version than the AP350s, use a different template
		for bridges and set the appropriate version
		numbers.
	1.	Select the checkbox to enable the device types.
	2.	From the list, select the device and click >> to add it to
		the list of valid devices for that template.
	3.	To remove devices from the list, select the device, then
		click Remove.
Software	1.	Select the checkbox to enable the software versions.
Versions	2.	Enter the version numbers if they are not in the list, or
		from the list, select the version number, then click >>
		to add it to the list of valid versions for that template.
	3.	To remove version numbers, select the version number
		form the list, then click Remove.

Step 3 Click Save to save the template.

Step 4 To delete a template, select it from the Auto-Managed Templates listbox, then click Delete.

Using Auto-Managed Options

This option allows you to email the results of your auto-managed configuration job.

Procedure

Step 1 Select Configure > Auto Update > Auto-Managed Configuration >

Auto-Managed Options. The Auto-Managed Configuration Options dialog box appears.

	User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14947-01		3-157