Cisco Systems 1105 manual Displaying an AP Summary Report, Procedure

Chapter 5 Using Reports

Displaying Current Reports

Displaying an AP Summary Report

Procedure

Step 1 Select Reports > Current. The window refreshes with a device selector in the left pane.

Step 2 If you want to search for the device, use the dialog box in the left pane above the device selector:

a.From the list, select the method you want to use to search for the device: by name or by IP address.

b.Enter the IP address or name, or use an asterisk (*) as a wildcard to denote numbers and letters, then click Search. The requested device appears in the Search Results folder.

Step 3 From the device selector in the left pane, click to expand the folder and select the device for which you want a report. The right pane refreshes.

Step 4 From the Report Name list, select Summary Report.

Step 5 Click View. Two tables are displayed: the AP Summary Report and the Fault Summary.

Note If the selected device has dual interfaces, two summary reports are displayed, one for each interface.

Table 5-14 AP Summary Report

Column	Description
Name	The system name for the device.
As Of	The time the device’s state last changed.
	For more information, see Time Display,
	page 1-5.
MAC Address	The device’s MAC address.

	User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
5-24	78-14947-01