Cisco Systems 1105 manual Protocol Filters, Deleting an Existing Policy Group from a Device

Chapter 3 Configuring Devices

Using the Templates

Field	Description
Receive	Enter the ID of a defined IP protocol filter, or select one
	of the filters you created using Association > IP
	Protocol Filters.
Transmit	Enter the ID of a defined IP protocol filter, or select one
	of the filters you created using Association > IP
	Protocol Filters.
IP Port
Receive	Enter the ID of a defined IP port filter, or select one of
	the filters you created using Association > IP Port
	Filters.
Transmit	Enter the ID of a defined IP port filter, or select one of
	the filters you created using Association > IP Port
	Filters.

Step 2 Click Add to add the group to the Policy Groups to Add list.

Step 3 To delete a group from the Policy Groups to Add list, select the group name, then click Delete.

Step 4 Select one of the following in the left pane:

•Preview to see your changes before you apply them. (See Previewing the Template, page 3-131.)

•Finish to save the template. (See Finishing the Template, page 3-132.)

•Another template category to configure more options. (See Template Categories, page 3-2.)

Deleting an Existing Policy Group from a Device

Step 1 Enter the group identification number in the Group ID text box, then click Add to add it to the Policy Groups to Delete list.

	User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
3-30	78-14947-01