Cisco Systems 1105 manual 104

Chapter 3 Configuring Devices

Using the Templates

Table 3-30 Start-Up Settings (continued)

Field	Description
Read “.ini” file from file server?	From the list, select one of the following:
	• always—Use this setting for the access
	point to always load configuration
	settings from an.ini file on the server.
	• never—Use this setting for the access
	point to never load configuration settings
	from an.ini file on the server.
	• if specified by server—Use this setting
	for the access point to load configuration
	settings from an.ini file on the server if
	the server’s DHCP or BOOTP response
	specifies that an.ini file is available.
BOOTP Server Timeout (sec’s)	Enter the length of time the access point
	waits to receive a response from a single
	BOOTP server.
DHCP Multiple-Offer Timeout	Enter the length of time the access point
(sec’s)	waits to receive a response when there are
	multiple DHCP servers.
DHCP Requested Lease	Enter the length of time the access point
Duration (min’s)	requests for an IP address lease from your
	DHCP server.
DHCP Minimum Lease Duration	Enter the shortest amount of time the access
(min’s)	point accepts for an IP address lease. The
	access point ignores leases shorter than this
	period.

	User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
3-104	78-14947-01