Cisco Systems 1105 manual Association Address Filters, Disallowed-The access point discards

Chapter 3 Configuring Devices

Using the Templates

Table 3-19 11b Radio Advance Settings

Field	Description
Status	From the list, select one of the following:
	• up— Enables the Radio port for normal
	operation.
	• down—Disables the device’s Radio port.
Packet Forwarding	From the list, select one of the following:
	• enabled—Allows normal operation.
	• disabled—Prevents data from moving
	between the Ethernet and the radio,
	which is useful in troubleshooting.
Default Multicast Address Filter	From the list, select one of the following:
	• Allowed—The access point forwards all
	traffic except packets sent to the MAC
	addresses set as disallowed under
	Association > Address Filters.
	• Disallowed—The access point discards
	all traffic except packets sent to the MAC
	addresses set as allowed under
	Association > Address Filters.
Maximum Multicast	Use this setting to control the number of
Packets/Second	multicast packets that can pass through the
	Ethernet port each second.
	If you enter 0, the access point passes an
	unlimited number of multicast packets.
	If you enter a number other than 0, the device
	passes only that number of multicast packets
	per second.

	User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14947-01		3-67