Cisco Systems 1105 manual Managing Devices, page 6-2. After moving devices to, Inventories

Chapter 1 Getting Started

Getting Started with Device Management

Table 1-2 Basic Initial Tasks (continued)
Task	Description and References
6. Move devices to the managed state and	You must move devices to the managed state on the
run inventory.	WLSE before you can use configuration, reporting, and
	monitoring features; or you can specify that all
	discovered devices be automatically managed (see
	Managing Devices, page 6-2). After moving devices to
	the managed state, you can run an immediate inventory
	to obtain device information needed to use such WLSE
	features as reports and automatic grouping (see Running
	Inventories, page 6-24).
7. Create other users and user roles as	The WLSE has one predefined user (the system
needed.	administrator with the username admin) and four
	predefined user roles. User roles are used to specify the
	WLSE functions a given user can have access to. To
	allow other users access to the WLSE, the system
	administrator must add users. The system administrator
	can also create roles to customize user access. See
	Administering Users, page 6-75.

	User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
1-8	78-14947-01