Cisco Systems 1105 manual 122

Chapter 3 Configuring Devices

Using the Templates

Table 3-40 Accounting Settings (continued)

Field	Description
Enable Update	From the list, select one of the following:
	• enable—Use this setting to allow
	accounting update messages for wireless
	clients.
	With updates enabled, the access point
	sends an accounting start message when
	a wireless client associates to the access
	point, sends updates at regular intervals
	while the wireless client is associated to
	the access point, and sends an
	accounting stop message when the client
	disassociates from the access point.
	• disable—Use this setting to not allow
	accounting update messages.
	With updates disabled, the access point
	sends only accounting start and
	accounting stop messages to the server.
Update Delay (sec’s)	Enter the update interval in seconds.
	If you use 360, the access point sends an
	accounting update message for each
	associated client device every 6 minutes.

	User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
3-122	78-14947-01