Cisco Systems 1105 manual Column Description

Chapter 5 Using Reports

Displaying Current Reports

Table 5-11 Group VLAN Report (continued)

Column	Description
AP Name	The name of the access point.
	Click to view the following:
	• AP Detailed Report—See Displaying a Detailed
	Report, page 5-26.
	• Fault Summary—See Viewing the Fault
	Summary Report, page 5-3.
	• EAP Authentication Report—See Displaying an
	EAP Authentication Report, page 5-30.
AP IP Address	The IP address of the access point.
	Click to open up a browser window to the AP
	Summary Status.
SSID	The unique identifier the client device uses to
	associate with the access point.
Number of Clients	The number of wireless clients connected to the
Connected	device.
Priority	The priority configuration based on the traffic type.
Default Policy Group	The number of the default policy group (which
	contains access parameters).
	Click to view the Policy Report—See Displaying a
	Group Policy Report, page 5-21.
As Of	The time the access point’s state last changed.
	For more information, see Time Display, page 1-5.

Step 4 To sort table data, click on the column heading you want to use to sort the data:

•A triangle indicates ascending order.

•An upside-down triangle indicates descending order.

•No triangle indicates that the data is not sorted.

	User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14947-01		5-19