Chapter4 Updating Device Firmware
Managing Firmware Images
4-6
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14947-01
Note If the image file is in zip format, it will be automatically unzipped during
the import operation.
Step 3 Click Import. An informational popup window appears. Do not close the popup
window until you receive a message that the import was successful or the import
failed.
If the import is successful, a confirmation message appears and the image is saved
on the WLSE.
If the import fails, an error message appears. The import may fail for one of the
following reasons:
•The image you are trying to import is not valid. An error message appears.
•There is insufficient space on the WLSE to store images.
•You specified an image that already exists in the image library and you did
not select the Overwrite Existing Image checkbox in Step 2.
Step 4 Repeat Steps 2 and 3 to import more images.
Step 5 For information on uploading firmware to access points and bridges, see
Managing Firmware Jobs, page 4-9.
File Location Enter the path to the image on the client system or
click Browse.
Images for Cisco Aironet 350 wireless bridges
may be named as images for access points (that is,
names begin with AP). To avoid confusion, you
can rename these images (see Editing Image
Details on the WLSE, page4-3.)
Overwrite Existing Image Select this checkbox if you are importing an ima ge
that is already stored on the WLSE. Otherwise, the
image import will fail if the same image is already
stored on the WLSE.
Table4-2 Desktop Import Window (continued)
Field Description