Cisco Systems 1105 manual Procedure

Chapter 2 Fault Monitoring

Notification Settings

You have the option of sending the email notification as plain text or in an XML format.

•An example of a message using plain text will appear as follows:

FaultId 19

DeviceId 106

DeviceIp 172.20.29.118

DeviceName sj-W-10-AP-118

MOId {MOID[c=1013,d=106,i=379]}

AlarmState Active

Description SSID policy violation

Severity P1

•An example of the same message sent in an XML format will appear as follows:

<Msg><FaultId>19</FaultId><DeviceId>106</DeviceId><DeviceIP>172.

20.29.118</DeviceIP><DeviceName>sj-W-10-AP-118<DeviceName><MOId>

{MOID[c=1013,d=106,i=379]}</MOId><AlarmState>Active</AlarmState>

<Description>SSID policy violation

</Description><Severity>P1</Severity></Msg>

Procedure

Step 1 Select Faults > Notification Settings. The Fault Notification Settings dialog box appears.

Step 2 Select the message format for the notification: Plain Text or XML.

	User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
2-24	78-14947-01