Cisco Systems 1105 manual Per Vlan Client Report

Chapter 5 Using Reports

Displaying Current Reports

Step 2 If you want to search for the device, use the dialog box in the left pane above the device selector:

a.From the list, select the method you want to use to search for the device: by name or by IP address.

b.Enter the IP address or name, or use an asterisk (*) as a wildcard to denote numbers and letters, then click Search. The requested device appears in the Search Results folder.

Step 3 From the device selector in the left pane, click to expand the folder and select the access point for which you want a report. The right pane refreshes.

Step 4 From the Report Name list, select Per VLAN Client Report.

Step 5 Click View. The report is displayed with the following headings:

Table 5-25 Per VLAN Client Report

Column	Description
VLAN ID	The identification number of the VLAN.
VLAN Name	The name of the VLAN.
Client MAC	The MAC address of the client.
Address
Client Name	The name of the client.
Client IP Address	The IP address of the client.
SSID	The unique identifier the client device uses to associate
	with the access point.
Client Type	The type of client associated to the access point.
As Of	The time the access point’s state last changed.
	For more information, see Time Display, page 1-5.

Step 6 To sort table data, click on the column heading you want to use to sort the data:

•A triangle indicates ascending order.

•An upside-down triangle indicates descending order.

•No triangle indicates that the data is not sorted.

	User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
5-44	78-14947-01