Cisco Systems 1105 Field Description, Click Add to add the Ssid to the list, then go to Step

Chapter 2 Fault Monitoring

Managing Profiles

•WEP Key Length—Go to Step 10

•HTTP Disabled—Go to Step 8

•Telnet Disabled—Go to Step 8

•PSPF Enabled—Go to Step 8

•User Manager Enforced—Go to Step 8

•HTTP Authentication—Go to Step 8

Step 2 To activate the policy, do the following:

Field	Description
Verify	Select if you want to verify that SSID is enabled.
Poll Interval	From the list, select the polling interval.
Severity	From the list, select a severity level to associate
	with this policy.
Enter ssid	Enter the unique identifier used by client
	devices to associate with the access point. Any
	alphanumeric character up to 32 characters
	long.

Step 3	Click Add to add the SSID to the list, then go to Step 11.
Step 4	To remove an SSID from the list, select it, click Remove, then go to Step 11.
Step 5	To activate the policy, do the following:
	Field	Description
	Verify	Select if you want to verify that firmware
		version is enabled.
	Poll Interval	From the list, select the polling interval.
	Severity	From the list, select a severity level to associate
		with this policy.
	Enter Firmware Version	Enter the firmware version.
Step 6	Click Add to add the firmware version to the list, then go to Step 11.

	User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14947-01		2-13