Cisco Systems 1105 manual Wlse

Chapter 6 Performing Administrative Tasks

Using Discovery and Managing Devices

Note You will need the IP address or name of the PC when configuring the

WLSE.

Step 2 Click User Setup on the left side of the initial page. The User Setup page appears.

Step 3 Enter a username for the user the WLSE will use for synthetic transactions and click Add/Edit.

Step 4 Enter a password in the first set of Password and Confirm Password textboxes. Click Submit.

Note You will need this name and password when configuring the WLSE.

Step 5 Click Network Configuration on the left side of the page. The Network Configuration screen appears.

Step 6 Click Add Entry. In the Add AAA Client area, enter the WLSE information in the following text boxes:

•Client Hostname—enter the WLSE hostname (or IP address)

•Client IP—enter the WLSE IP address

•Key—enter a secret key

Note You will need this key when configuring the WLSE.

Step 7 Select RADIUS (Cisco Aironet) from the Authenticate Using list.

Step 8 Click Submit or Submit+Restart. A restart is required for the changes to take effect.

	User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14947-01		6-17