Lantronix XPort AR FTP Configuration

4: Configuration Using Web Manager
XPort AR User Guide 23
Figure 4-6. SNMP Configuration
2. Enter or modify the following fields:
SNMP Agent Select On to enable SNMP.
Read Community Enter the SNMP read-only community string.
Write Community Enter the SNMP read/write community string.
System Contact Enter the name of the system contact.
System Name Enter the system name.
System Description Enter the system description.
System Location Enter the system location.
Enable Traps Select On to enable the transmission of the SNMP cold start
trap messages. This trap is generated during system boot.
Primary TrapDest IP Enter the primary SNMP trap host.
Secondary TrapDest IP Enter the secondary SNMP trap host.
3. In the Current Configuration table, delete and clear currently stored fields as
necessary.
4. Click Submit. Changes are applied immediately to the XPort AR.
FTP Configuration
To configure FTP:
1. Click Network Æ FTP from the navigation menu. The FTP window opens to
display the current configuration.