4: Configuration Using Web Manager

CPM: Groups

The CP Groups page allows for the management of CP groups. Create a CP group and add CPs to it. A group, based on its state, triggers outside events (such as sending email messages). Only an enabled group can be used as a trigger.

To configure the XPort AR’s CP groups:

1.Click CPM Æ Groups from the navigation menu. The CPM: Groups window displays.

Figure 4-24. CPM: Groups

2. The Current Configuration table displays the current settings for each CP group:

Current Configuration

Group Name

Displays the CP group’s name.

 

 

State

Indicates whether the group is enabled or disabled.

 

 

CP Info

Provides CP group information.

 

 

3.To display the status of a specific group, click the CP group name under the Current Configuration table. The Group Status table displays, providing detailed information about the CP group.

Group Status

Name

State

Displays the CP Group name.

Current enable state of the CP group. Note: Peripheral pins are locked.

XPort AR User Guide

40

Page 40
Image 40
Lantronix manual CPM Groups, To configure the XPort AR’s CP groups, Name State